General OSHA and EPA requirements for occupational safety and environmental controls

order

Title: General OSHA and EPA requirements for occupational safety and environmental controls*

 

* Each student will be assigned to comprehensive description of ONE of EPA or OSHA REGULATIONS (STANDARDS)- INDIVIDUAL TOPIC.

 

Project 2 is over 314 Unit 4 (See below)

 

Requirements for project # 1 and presentation format.

 

  • All assignments in 314 are strictly individual, identical work will not be accepted.
  • There will be penalties for late reports.
  • Presentation will be posted on Blackboard (Discussion Board) for the class review and comments.
  • Presentations should be in PowerPoint (PPT). Overall format including visual effects, font size, margin size, coloring, graphs, charts, figures and etc. should be (professionally) reasonable.

PPT is expected to include min 35-40 slides.

  • Title page should include project title, student(s) name, course title and date.
  • Presentation contents are at the discretion of a student and shows his/her research skills and professionalism. Describe the most important parts and statements which are the most essential and represent the concept of the regulations you assigned.

 

Project 2 should include purpose, definitions, requirements, all messages sent to users you found MOST IMPORTANT when working on the assigned topic by your experience / professional opinion and describe in details into your project PPT presentation.

 

There should be at least 5 references cited, not more than one of them can be online source. Use a combination of valid website, journals and books.

 

If you use other references to do that it will be a big plus.

 

Max possible points for project 2 = 95 pts (plan= 5pts + PPT= 55 pts + posting PPT on blackboard= 10 pts + Comments = 25 pts)

 

 

Reviewing the PPTs the students will learn about the most important parts of a project and they supposed to demonstrate that in their Comments (essays).

Because of importance of the Comments part of projects the substantial points given and impact the final grade.

–     Your COMMENTS must include:

What did you learn from particular presentation (any additional information of your own experience or knowledge will be given extra points)?

Evaluation of COMPREHENSIVENESS;

Evaluation of required topic description and compliance with project requirements;

Criticism and suggestions.

  • Short COMMENTS with just “good job”, “slides are oversized or overloaded…”, etc. WILL NOT BE GRADED.

Please don’t post on Discussion Board your comments, just send to me.

 

Note: Please when finish your review, send just ONE file when all reviews are completed and comments accumulated in ONE word document.

 

Note: Please when finish your review, send just ONE file when all reviews are completed and comments accumulated in ONE word document.

 

Deadline for submission all comments is April 3, 2016.

 

Your comments will be graded with max possible points = 25

 

 

Unit 4: General requirements for environmental controls

 

  • OSHA and EPA requirements for development occupational and environmental safety management programs

 

Subpart G — Occup Health and Environmental Controls

 

  1910.94  Ventilation.

1910.95   Occupational noise exposure.
 
   

 

Subpart J  General Environmental Controls

1910.144  Safety color code for marking physical hazards.

1910.146  Permit-required confined spaces.

1910.147  The control of hazardous energy (lockout/tagout

 

1910.1096  Ionizing radiation.
1910.1096
   
  • Listing and review of Safety and Health legislation, Federal Regulatory Agencies, and OSHA regulations and standards;

 

– Asbestos Hazard Emergency Response Act;

– Consumer Product Safety Act;

– The Fair Packaging and Labeling Act;

– Federal Coal Mine Health and Safety Act;

– Federal Environmental Pesticides Control Act (amending the Federal Insecticide, Fungicide, and Rodenticide Act);

– Fire Protection, Prevention, and Control Act;

– Hazardous Substance Act;

– Hazardous and Solid Waste Amendments;

– Poison Prevention Packaging Act;

– Recourse Conservation and Recovery Act (RCRA);

– Superfund Amendments and Reauthorization Act;

– Toxic Substances Control Act (TSCA);

 

Associated handouts for Unit 4

Unit 4, Handout # 1,          RCRA 

Unit 4, Handout # 2,          Environmental Basics, article
Unit 4, Handout # 3,          Hazardous Waste Amendment to RCRA

Unit 4, Handout # 4,          TSCA
Unit 4, Handout # 5,          Asbestos Hazard Emergency Response Act

Unit 4, Handout # 6,          Clean Water Act

Associated assignment(s)

 

Project # 2

 

 

 

References

Code of Federal Regulations 29 CFR, Part 1910 General Industry ( OSHA Regulations, Editions 2001-2004)

 

– Asbestos Hazard Emergency Response Act;

– Consumer Product Safety Act;

– The Fair Packaging and Labeling Act;

– Federal Coal Mine Health and Safety Act;

– Federal Environmental Pesticides Control Act (amending the Federal Insecticide, Fungicide, and Rodenticide Act);

– Fire Protection, Prevention, and Control Act;

– Hazardous Substance Act;

– Hazardous and Solid Waste Amendments;

– Poison Prevention Packaging Act;

– Recourse Conservation and Recovery Act;

– Superfund Amendments and Reauthorization Act;

– Toxic Substances Control Act;

 

Supplemental References:

 

  1. Accident Prevention Manual for Business and Industry. National Safety Council.

 

Engineering and Technology. 10th edition-Part 1,2,3,4, see also “Inspection” in Index.

 

Administration and Programs. 10th edition. – Chapters 2-6 (see also “Inspection(s)”, “Inspection Report”, and “Inspector” in Index.                                                                                                           

 

  1. Fundamentals of Industrial Hygiene, Fourth or Fifth Edition; Plog, Barbara, Editor;  Chicago, IL.  National Safety Council.

 

  1. Kavianian, H.R. and C.A. Wentz Jr Occupational and Environmental Safety and Management,., Van Nostrand Reinhold New York, ISBN 0-442-23822-3, Indiana State Library T55.K38.1990

 

  1. Goetsch, David, Occupational Safety and Health, 6th ed., 2007,Pearson Prentice Hall,

ISBN 0-13-239760-9

 

  1. Keller, J.J. OSHA Compliance Manual: Application of Key OSHA Topics.
order

Last Completed Projects

# topic title discipline academic level pages delivered
6
Writer's choice
Business
University
2
1 hour 32 min
7
Wise Approach to
Philosophy
College
2
2 hours 19 min
8
1980's and 1990
History
College
3
2 hours 20 min
9
pick the best topic
Finance
School
2
2 hours 27 min
10
finance for leisure
Finance
University
12
2 hours 36 min

Are you looking for a similar paper or any other quality academic essay? Then look no further. Our research paper writing service is what you require. Our team of experienced writers is on standby to deliver to you an original paper as per your specified instructions with zero plagiarism guaranteed. This is the perfect way you can prepare your own unique academic paper and score the grades you deserve.

Use the order calculator below and get ordering with premiumessayhelp.com now! Contact our live support team for any assistance or inquiry.

Type of paper Academic level Subject area
Number of pages Paper urgency Cost per page:
 Total: